OR

HR25CF126-200

OUTPUT

DC VOLTAGE SET AT

12.6V

RATED CURRENT

2A

CURRENT RANGE

0 ~ 2A

RATED POWER

25.2W

RIPPLE & NOISE (max.)

150mVp-p

CHARGING VOLTAGE

9 ~ 12.6V

LINE REGULATION

±1.0%

LED INDICATOR

Green LED ON : <200mA   Red LED ON : >200mA of charge current

SETUP, RISE, HOLD TIME

200ms, 50ms, 16ms   at full load

INPUT

VOLTAGE RANGE

90 ~ 264VAC

FREQUENCY RANGE

47 ~ 63Hz

EFFICIENCY(Typ.)

80%

AC CURRENT (Typ.)

1.0A/115VAC     0.5A/230VAC

INRUSH CURRENT (max.)

80A/230VAC

LEAKAGE CURRENT (max.)

0.25mA / 240VAC

PROTECTION

OVERLOAD

90 ~ 110% Constant current mode and over 300% pulsing mode

Protection type : Constant current limiting, recovers automatically after fault condition is removed

OVER VOLTAGE

The output terminal voltage will not exceed 13.7V

Protection type : the charger unit is able to recover to its normal operating
Conditions once the over voltage fault has been removed and the MCU has been reset.

OVER TEMPERATURE

Overheat Detection（ntc 10k）

Protection type : Shut down o/p voltage, recovers automatically after temperature goes down

ENVIRONMEN T

WORKING TEMP.

0 ~ + 40℃ (Refer to output load derating curve)

WORKING HUMIDITY

20% ~ 90%    RH non-condensing

STORAGETEMP.,

-20 ~ +85℃ , 10 ~ 95% RH

TEMP. COEFFICIENT

±0.03% /℃ (0 ~ 50 ℃)

VIBRATION

10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes

SAFETY & EMC

SAFETY STANDARDS

UL1310,UL60335

WITHSTAND VOLTAGE

I/P-O/P:4242VDC (2 Pin)

ISOLATION RESISTANCE

I/P-O/P, I/P-FG:100M Ohms / 500VDC / 25 / 70% RH

EMI CONDUCTION & RADIATION

Compliance to EN55014 class B,

EMS IMMUNITY

Compliance to EN61000-4-2,3,4,5,6,11, Light industry level, criteria A

PACKING

0.4Kg;

CABLE

Standard type